Genesis Arduino Robot Card is a kind of Arduino Nano Shield. Thanks to the small-sized and highly usable Genesis Arduino Robot Card, you'll be able to easily perform mini-sumo robots, line-tracking robots, and small and medium-sized robots that can be flocked with this card.Below are the Arduino Nano and Genesis Arduino Robot Card pin layout table.
| D0 |
Empty |
D11 |
Right Motor PWM (Right Motor Speed Control) |
| D1 |
Empty |
D12 |
Left Motor Direction Control |
| D2 |
Empty |
D13 |
Right Engine Direction Control |
| D3 |
Left Motor PWM (Left Motor Speed Control) |
A0 |
Empty |
| D4 |
Empty |
A1 |
Empty |
| D5 |
Dipswitch 1 Girişi |
A2 |
Empty |
| D6 |
Dipswitch 2 Girişi |
A3 |
Empty |
| D7 |
Dipswitch 3 Girişi |
A4 |
Empty |
| D8 |
Mode LED (Blue Led) |
A5 |
Empty |
| D9 |
Speaker |
A6 |
A6 Trimpot |
| D10 |
Start Button & Module Input |
A7 |
A7 Trimpot |
You will be able to incorporate your sensors into your project without difficulty with 8 sensor inputs on the card and the GND, VCC, Signal pins positioned side by side.
You can define eight separate start commands to your sumo robots with the two-position Dipswitch on the product. Thanks to two internal trimpots, the engine speed settings will not need to be edited software.
Technical specifications:
- Working Voltage: 8-24V
- Idle Working Current: 5mA
- Operating Current Per Channel: 3A
- Current Operating Current Per Channel: 4A
- Internal Protection: Yes
- Built-in Temperature Protection: Yes
- Built-in Short Circuit Protection: Yes
- Dimensions: 98 x 38 x 18mm
- Weight: 33g
Documents and Useful Links:
- Genesis Technical Documentation English (PDF)
EN
